government tenders for hospital beds-we can handle it perfectly

There are a few of clients from the overseas country inquiring the hospital bed product,what they are concerned is that our hospital bed product must be 100% under the requirement of government tenders for hospital beds and meet the specification.

Our advantage as followings:

1,Profession of hospital bed manufacturing more than 10 years experience.

2,The largest hospital bed company in henan province,which serve the population covering more than half of the euro country.

3,We have skilled mechanical engineer.

4,Abundant hospital bed accessories parters.

Summary:Once the client of government tenders for hospital beds present for us,we will process it within 24 hours,and offer our solution for the hospital bed tender.

The followings example is the past 7 days where client are looking for us to handle it. 

1,Tender of three function electric hospital bed from BOTSWANA

DESCRIPTION/TARGET SPECIFICATION		BIDDER’S SPECIFICATION
The bed must have electrically operated height and back rest adjustment		YES
With wheels to enable easy movement of the bed		YES
Elevation. Beds can be raised and lowered at the head and feet		YES
Adjustable height		YES
Backrest lifting		YES
Whole lifting function		YES
Lifting side rails		YES
With side rails which can be lowered down		YES
Overall Size	To accommodate an adult of up to 1800mm	YES
Bed surface	To fully support mattress;	YES
	Mattress should not sink into the bed surface
Guardrails:	White ABS plastic lifting guard rails	YES
Head/Foot Board:	White ABS plastic Head/foot board	YES
Gross Weight	120 – 150 kg	YES
Bed Frame	Non rusty material or powder coated/epoxy coated	YES
Load capacity:	50kg to 100kg	YES
Backrest angle:	0 -70°	YES
Leg Up Angle	0 – 25°	YES
Integral Lifting	450mm – 600mm	YES
Casters:	Four(4) mute casters	YES
Mattress	Covered with wipe clean material e.g vinyl	YES

Conclusion:It is a simple electric hospital bed,our offer meet the specification in 100%,we provide product details with image for client analysis and evaluation.

Hospital bed adjustable position demonstration

Backrest up & down

 

Knee up and down

High and low 

2,Tender of electric icu hospital bed from RWANDA

1,tender of hospital bed specification:  ICU BEDS REQUIREMENTS

An ICU beds is an electric bed capable of attaining chair and Trendelenburg positions and fitted with a pressure-relieving mattress.

Requirements for an ICU beds:

– Must be electric – can be operated using a handset or control panel rather requiring medical staff to reposition the bed manually.

– Must offer cardiac chair and Trendelenburg positioning functions – these positions facilitate respiration and circulation to aid bodily function. Read more about the Trendelenburg position and why it is used.

–     Can accommodate a pressure-relieving mattress – foam or replacement

air mattresses are used for pressure relief. ICU beds must have appropriate dimensions to fit these mattresses.

–     CPR RELEASE: Most intensive care doctors and nurses would consider CPR

release as an essential for ICU beds. This function allows medical teams to flatten the bed platform at the push of a button or lever. In an emergency, this quickly creates the flat, hard surface needed to perform CPR (Cardiopulmonary resuscitation)

–     IV POLES WITH HOOKS: IV poles are used to securely hang fluids or

medications that a patient needs to have administered via a drip. They typically have two (2) or four (4) hooks, which can each support a fluid container. Having an IV pole with multiple hooks is beneficial in ICUs where patients will often require multiple medications at once. Choosing an ICU bed with an IV pole included makes it easier to move a patient in an emergency. Rather than having to wheel both the bed and the IV pole, medical staff only have to focus on moving one piece of equipment. This reduces the risk of injury or damage to the IV supply.

–     REMOVABLE HEAD AND FOOTBOARDS: Beds with removable head and

footboards, which lock safely into place when in use, are often preferred in ICUs. There are two key benefits to this design:

o In an emergency scenario, removing the headboard allows medical staff to

stand behind the patient. This frees up more space to work around the patient and provides easier access to the head to support breathing.

o It is easier to perform prone positioning. This procedure involves rotating

a patient from lying face up to face down.

– NURSE CONTROLS: Electric hospital beds can have several different options for controls. Some have a patient handset or patient controls built into the side rail. Others have a nurse control handset or nursing controls built into the base of the footboard. Often, there will be a combination of controls available on a single bed.

Conclusion:Our original design meet the government tender of hospital bed specification requirement.Our offers of icu hospital bed as followings in image demonstration.

• Nurse control

• Backrest up and down

• Keen up and down

 

• High and low

• Trendelenburg and reverse trendelenburg position

S.No:	ICU BEDS	REQUIRED SPECIFICATIONS	Supplier’s Comments / Remarks
1	Must be electric	can be operated using a handset or control panel rather requiring medical staff to reposition the bed manually	YES
2	Must offer cardiac chair and Trendelenburg positioning functions	these positions facilitate respiration and circulation to aid bodily function. Read more about the Trendelenburg position and why it is used.	YES
3	Can accommodate a pressure-relieving mattress	foam mattresses are used for pressure relief. ICU beds must have appropriate dimensions to fit these mattresses.	YES
4	CPR RELEASE	Most intensive care doctors and nurses would consider CPR release as an essential for ICU beds. This function allows medical teams to flatten the bed platform at the push of a button or lever. In an emergency, this quickly creates the flat, hard surface needed to perform CPR (Cardiopulmonary resuscitation)	YES
5	IV POLES WITH HOOKS	IV poles are used to securely hang fluids or medications that a patient needs to have administered via a drip. They typically have two (2) or four (4) hooks, which can each support a fluid container. Having an IV pole with multiple hooks is beneficial in ICUs where patients will often require multiple medications at once. Choosing an ICU bed with an IV pole included makes it easier to move a patient in an emergency. Rather than having to wheel both the bed and the IV pole, medical staff only have to focus on moving one piece of equipment. This reduces the risk of injury or damage to the IV supply.	YES
6	REMOVABLE HEAD AND FOOTBOARDS	Beds with removable head and footboards, which lock safely into place when in use, are often preferred in ICUs. There are two key benefits to this design: o In an emergency scenario, removing the headboard allows medical staff to stand behind the patient. This frees up more space to work around the patient and provides easier access to the head to support breathing. o It is easier to perform prone positioning. This procedure involves rotating a patient from lying face up to face down.	YES
7	NURSE CONTROLS	Electric hospital beds can have several different options for controls. Some have a patient handset or patient controls built into the side rail. Others have a nurse control handset or nursing controls built into the base of the footboard. Often, there will be a combination of controls available on a single bed	YES.Handset and nurse control station on head board.
8	MATTRESS	MATTRESS INCLUDED ???	YES

 

2,tender part 2:normal hospital bed specification:

NORMAL BED

A normal hospital bed should have the following:

–     Each frame must be welded

–     Welded joints: all welded joints shall be smooth

–     Size of the bed: LxWxH:2100X960X500 mm ±100mm

– Steel hand crank (baked epoxy powder coating finishing), crank-pole is equipped with limited protecting component (black rubber)

–     It will have ABS bed head/tail, backrest angle 0-70 degrees by crank

– Bed frame shall be made of Stainless Steel 316L , tube size 40*80*1.9 mm of thickness

– Castors: 4 swivel, antistatic 125 mm diameter, metallic rubber castors, 2 with brakes

–     Bed capacity: minimum 180 kg

– Mattress mode shall be H-3 mattress for full-fowler bed, thickness 80mm all colors except white

– It will be waterproof, removable, and washable (to be smooth and not retaining fluids)

–     It will be equipped with 1 stainless steel infusion stand with 2 hooks

Conclusion:Our offers of one crank hospital bed as followings in image demonstration.

REQUIRED SPECIFICATIONSS	Supplier’s Remarks
Each frame must be welded	YES
Welded joints: all welded joints shall be smooth	YES
Size of the bed: LxWxH:2100X960X500 mm ±100mm	YES
Steel hand crank (baked epoxy powder coating finishing), crank-pole is equipped with limited protecting component (black rubber)	YES
It will have ABS bed head/tail, backrest angle 0-70 degrees by crank	YES
Bed frame shall be made of Stainless Steel 316L , tube size 40*80*1.9 mm of thickness	YES
Castors: 4 swivel, antistatic 125 mm diameter, metallic rubber castors, 2 with brakes	YES
Bed capacity: minimum 180 kg	YES
Mattress mode shall be H-3 mattress for full-fowler bed, thickness 80mm all colors except white	YES
It will be waterproof, removable, and washable (to be smooth and not retaining fluids)	YES

 

The accessories of hospital bed matress

 

Share it

Your Name *

Your Email *

Subject *

Your Message *